DPSS Laser | CivilLaser Blog

Category Archives: DPSS Laser

August 2, 2022 Civil Laser, DPSS Laser

543nm Green Solid State Laser with SMA905 Optical Fiber

This is a 543nm solid state laser system. The output power is 100mW, it can be adjusted by the rotary button on the power supply. The red button is the power switch. The key is a laser switch. The middle LCD shows the current working current. The rotary button on the right is to adjust the current size.

There are 3 working modes for the laser to choose from. Select the working mode CW/TTL/Analog by the sliding button on the back of the power supply.

This laser coupled a 1000μm, 3 meters in length, SMA905 interface fiber, and its can be customized.

The effect of laser output from the fiber port.

February 20, 2017 All Posts, DPSS Laser

3IN1 DPSS Laser modulation CW/TTL/Analogue CivilLaser

3IN1 DPSS Laser modulation CW/TTL/Analogue

This video is from a 300mw Green DPSS Laser, the max out power is 300mw, and You can adjust the output power by adjusting the current.

it includes a Lab adjustable power supply. this kind of power supply support TTL and analogue signal input.

March 19, 2015 All Posts, Civil Laser, DPSS Laser

CivilLaser DPSS Lasers 405nm 457nm 473nm 515nm 520nm 532nm 561nm 589nm 607nm 637nm 671nm

405nm 100mW Laser

450nm 100mW Laser

457nm 500mW Laser

473nm 100mW Laser

473nm 200mW Laser

515nm 20mW Laser

520nm 50mW Laser

520nm 1000mW Laser

532nm 10W Laser

532nm 1000mW Laser

561nm 100mW Laser

589nm 1000mW Laser

589nm 100mW Laser

589nm 1000mW Laser

607nm 100mW Laser

637nm 200mW Laser

637nm 1500mW Laser

671nm 200mW Laser

- Recent Posts
- Comments
- C+L Band 26dBm 400mW Erbium-doped Fiber Amplifier
  
  3:10 AM By MeiLing Chen
  With the rapid development of information technology, optical fiber communication has become the cornerstone of modern communication networks. In optical fiber communication systems, erbium-doped fiber amplifiers Read More »
- 1550nm 10KW Peak Power Pulse Nanosecond Fiber Laser
  
  6:29 AM By MeiLing Chen
  Today our laboratory introduces a 1550nm 10kW nanosecond pulse fiber laser. It is a modular design, the size is 100x100x30 mm. This nanosecond laser module uses an Read More »
- 40dBm 10W High Power Erbium-doped PM Fiber Amplifier
  
  6:10 AM By MeiLing Chen
  The one in the video is a benchtop 40dBm erbium-doped fiber amplifier. The input and output fibers of the PM amplifier are polarization maintaining fiber PM1550 and Read More »
- 532nm 7W High Power Diode Pumped Laser
  
  1:24 AM By MeiLing Chen
  This time it is a 532nm green DPSS laser commonly used in laboratories. Its output power can reach 7000mW. A heat dissipation module is added to the Read More »
- 1550nm 3kHz Linewidth PM Fiber Laser Source Benchtop
  
  5:36 AM By MeiLing Chen
  Single frequency narrow linewidth fiber laser adopts rare earth doped fiber DFB laser cavity structure, output single longitudinal mode laser with wavelength of 1550nm, spectral linewidth Read More »