This time it is a 532nm green DPSS laser commonly used in laboratories. Its output power can reach 7000mW.  A heat dissipation module is added to the bottom of the laser. There are 2 cooling fans at the bottom of the laser heat dissipation. There are two working modes, CW/Modulation, to choose from on the back of the power supply.

There is a protective cover on the interface where the laser head is connected to the laser power supply. When connecting, the protective cover needs to be removed first. The light outlet of the laser head has a protective cover, which must be removed before starting the machine.

The Knob on the front of the power supply is used to adjust the current, thereby controlling the laser output power. Adjust the output power to maximum. After preheating for about 1 minute, the laser can output continuously and stably.

The high power green laser beam. The following are the effects of indoor shooting during the day.