Tag Archives: high power lasers
880nm 20W Fiber Laser Source NIR Invisiable Laser
This is 880nm 20W high power infrared laser. A fiber coupling interface is added to the laser output port, which can be inserted into a fiber. A cooling device is added at the bottom of the laser module, which is composed of aluminum sheet and cooling fans. The laser supports CW continuous work and modulation work mode, which can be adjusted by the slider button on the back of the laser power supply.
The optical fiber is pluggable, the default fiber interface is FC/PC, and the fiber interface can be customized. The Adjustor button on the power supply is used to adjust the working current, so as to adjust the laser output power. Let’s check it now.
The 880nm laser is a near-infrared laser, basically invisible, only a faint red dot can be seen on the light shield.
High Power Laser 18W 455nm Blue Laser Source
It is 455nm 18W blue laser system. The laser head is equipped with a heat sink. The heat sink has 3 cooling fans, which can effectively extend the continuous working time of the high-power laser. There is a small power interface on the side of the data cable close to the laser head for the cooling fan. In addition, the Lock crystal head cannot be pulled out. External signal Mod Input, no need to connect in CW working mode.
This is a power tunable laser by adjusting the current. Turn the ‘Adjustor’ knob clockwise to adajust the current, when the current exceeds the minimum working current, the Laser indicator turns green, and there is laser output at this time. ‘Adjustor’ rotates clockwise to the end, which is the maximum working current and the maximum output power of the laser. In addition, the red STOP button is used for emergency stop, and it is not needed under normal circumstances.
Safety reminder:
Wear laser safety glasses when operating high-power lasers. It is forbidden to irradiate human eyes and skin with laser light.
